Beware Of The Issues That Must Be Asked When Cabinets Are "Tricky"

One must ask the thickness of the cabinet board

Currently on the market there are 16mm, 18mm and other thickness specifications of the plate, the thickness of the different costs are very different, only this one 18mm thick than the 16mm thick plate costs 7% higher. 18mm thick plate made of Contemporary Kitchen Cabinet use The service life can be extended by more than double to ensure that the door panel does not deform and protect the countertop from cracking. When consumers look at the samples, they must carefully understand the composition of the materials and have a good idea.

Second, we must ask whether the independent cabinet

The entire set of cabinets will affect the fastness, so consumers should be clear when buying the whole cabinet, the difference between the two life and stability of 2-3 times, the cost difference of 5%. Consumers can be packaged and installed The cabinets are used to identify if the individual cabinets are assembled in a single cabinet, each cabinet should have a separate package; consumers can also observe them in front of the cabinet when the cabinet is installed.

Second, ask how to assemble

Usually small factories or manual on-site production can only be screwed or glued together.

Some Kitchen Cabinets Manufacturer use of the latest third-generation box ram structure plus fixtures and quick-loading parts, more effectively ensure the stability and affordability of the box, and less use of adhesive, more environmentally friendly.

Four to ask whether the backplane is single-sided or double-sided

In order to save costs, some Kitchen Cabinets Manufacturers cut corners, and only do one-sided seals on the back panel. The ones that cannot be seen are bare. After the single-sided sealing, the backboard is prone to moisture and mildew. It is also easy to release formaldehyde and cause pollution. Therefore, it must be double-sealed.

Five to ask whether the anti-mute silent edge

Using cabinets with soundproof and silent sealing, the impact force can be relieved when the doors are closed, eliminate noise, prevent worms and other insects from entering, and there is no difference in the cost of tamping and sealing. The table top, door panels and cabinets are also to be viewed. And whether the sealing strip and the collision strip are processed by the membrane pressure of the machine, whether or not it is pressed on both sides. Poor sealing of the seal will cause fumes, dust, and insects to enter.